Replacement Graphics for SEG Fabric Pop-Ups

Product Description

Update the message on your SEG Fabric Pop-Up with replacement graphics from Banner&Board. Reuse the existing hardware and give your display a new appearance at an economical cost.

Graphics comprise three separate Display Polyester panels. Front panels have 9mm silicone edging on all sides; end panels have 9mm edging on the left and right, plus top and bottom hems. The end panels are slightly taller, as shown in the close-up images and artwork templates.

Notice

These graphics are sized for hardware supplied by us. A different or non-identical third-party unit may give an incorrect or poor fit.

Include the original order ID when replacing a graphic for a unit previously bought from us. This helps confirm the correct size, particularly if the hardware has changed and current artwork templates differ from those for your model.

Strong light above or behind the fabric may show the frame through the print because the material is not fully opaque. Control those light sources and adjust the display position to minimise this.

Printing, cutting and finishing fabric can introduce slight movement or alignment variations. Avoid continuous shapes or highly detailed designs across panel joins.

Prepare the artwork panel by panel rather than assuming that each piece has the same edging. The front and end panels use different finishing arrangements, and the templates reflect those differences. Check the original order ID to identify the existing unit, then avoid detailed artwork crossing the joins where small fabric movements could affect the result.